PLC Trainer
Specification
  • NAIS PLC, FPO-C14S with 8 input, 6 output.
  • Switching power supply.
  • Aluminium casing.
  • Programming cable RS232C.
  • Software in CD form.
  • Accessories : pilot lamp, switches, banana jack, power cable, patch core, Instruction manual.


    Pneumatic & Electro - Pneumatic Trainer
This training kit are design to teach student for demonstrating basic pneumatic and electro - pneumatic.

 The Systems consist of;

 A
 1- 2   units double acting cylinder
 2- 1   unit single acting cylinder
 3- 1   unit filter regulatar
 4- 1   unit 3/2 way valve selector type
 5- 2   unit 3/2 way valve push button actuated
 6- 4   units 3/2 way valve roller
 7- 1   unit 5/2 way valve single pilot
 8- 1   unit 5/2 way valve double pilot
 9- 1   unit 5/2 way valve single solenoid
 10- 1   unit 5/2 valve double solenoid
 11- 6  units flow control valve
 12- 4   unit sensor
 13- 4   unit relay c/w base
 14- 2   unit timer c/w base
 15- 4   unit switches

 B Accessories
 1- 4 mm pneumatic hose
 2- T connector
 3- Straight connector

 C Training Aids
 1- Pneumatic & Electro - pneumatic training simulation kit ( 2 cds )


    Conveyor


    Invertor Motor Trainer

FULLY/ELECTRO PNEUMATIC TRAINER- ECAML-PNEU-1

Trainer for demonstrations and experiments in pneumatic field.
The components are mounted on the bosrd, however the system modularity and flexibility allow us to adapt to the specification and requipments for each customer.


  1. Advance Pneumatic Training Kits
 
Item No. Description
Qty 
a) Advance Pneumatic Training Kits
- Plug board (550mm * 700mm) with built-in air and electrical manifold
- Double acting cylinder 25mm * 100mm
- Single acting cylinder 25mm * 50mm
- 3/2 Push button/spring
- 3/2 Push-pull knob bistable
- 3/2 Roller/spring (1*2)
- 3/2 Pilot/spring
- 5/2 Push-pull knob bistable
- 5/2 Pilot/spring
- 5/2 Pilot/pilot bistable
- And Valve
- Shuttle valve (OR valve)
- Non-return throttle valve
- Throttle valve
- Air service Unit c/w shut-off valve
- Pressure regular c/w gauge
- 4mm probe coupling
- 4mm equal Tee connectors
- 4mm P.U tube (25mm)
- Tube cutter
- Release tool
- Air reservoir
- Photo Electric Sensor
- Transistor Sensor (PNP)
1 unit
2 unit
1 unit
2 unit
1 unit
2 unit
1 unit
1 unit
1 unit
2 unit
2 unit
2 unit
2 unit
2 unit
2 unit
1 unit
10 unit
3 unit
1 roll
1 unit
1 unit
1 unit
1 unit
1 unit

   2. Electro Pneumatic
 
Item No. Description
Qty 
a) Electro Pneumatic
- Double acting cylinder with magnetic read switch and trip cam
- 5/2 single solenoid valve/spring, 24V
- 3/2 single solenoid valve/spring, 24V
- 5/2 double solenoid valve, 24V
- Electrical roller limit switch, N.O +N.C (1*2)
- Relay 24V=3 alternating cantacts
- timer relay (for use with JTS97029E)
- Electrical push button, N.O +N.C cantacts
- Electrical selector switch N.O +N.C contacts
1 unit
1 unit
1 unit
2 unit
1 unit
3 unit 
1 unit
2 unit
1 unit
Item No. Description
Qty 
b) - Inductive proximity switch, NPN type
- Power diodes, 1*2
- Indicator lamps, 1*2
- Pressure switch, alternating contacts
- Connecting cable set
- Electrical push button switch, 2 N.O cantacts
- Electrical push button switch, 2 N.C cantacts
1 unit
1 unit
1 unit
1 unit
1 fot
1 unit
1 unit


   ELECTRO-HYRAULIC TRAINER-ECAML-HYRAU-1

  Trainer for demonstrations and experiment in the electro-hyraulic field.
  All the components are includes as shown below :

  1.Workstation for hydraulic and Electro-Hydraulics
 
Item No. Description
Qty (Set)
1.1 - Mobile single sided
- Aluminium profile workstation
- One Oil drip tray
- Hydraulic pack with:
- Oil reservoir volume 30 liter
- Operating pressure 70 bar (700kPa)
- Hydraulic Oil (HLP 22) 60 liter
1
Item No. Description
Qty (Set)
2.1 Training set in Basic Hydraulics
Each set consisting of the following items: 
 
2.1.1 Hydraulics pressure gauge
- Glycerin bath-type damped for protection against pressure peeks
- Indication range: 0-100 bar (0-1450 psi)
- Nominal Diameter: 63 mm
- Operation pressure static: 0-75 bar (1-1100 psi)
- Operation pressure dynamic: 0-63 bar (1-970 psi)
2
2.1.2 Flow Control valve
- Adjustable by rotary knob
- Max, Operating Pressure: 120 bar (1700psi)
- Max, Pressure: 210 bar (3000psi)
- Nominal flow rate: 20 1/min
20
2.1.3 One way flow control valve
- Adjustable by rotary knob
- Max, Operating Pressure: 120 bar (1700psi)
- Max, Pressure: 210 bar (3000psi)
2
2.1.4 Shut-off valve
- Manually actuated
- Operating Pressure: 120 bar
- Max, Pressure: 210 bar
10
2.1.5 Non-return valve (Check valve)
- Operating pressure: 210 bar
- Max, Pressure: 250 bar
- Opening pressure / cracking pressure: 0.35 bar (5 psi)
1
Item No. Description
Qty (Set)
2.1.6 Non return valve (Check valve)
- Operating Pressure: 210 bar
- Max, Pressure: 250 bar
- Opening pressure/ Cracking pressure: 5 bar(75psi) 
1
2.1.7 T-Connector
- Operating pressure: 250 bar
- Max, Pressure: 300 bar
10
2.1.8 Pressure relief valve, direct
- Manual adjustable via rotary knob
- Operating pressure: 210 bar
- Maximum pressure: 250 bar
- Max, flow: 16 1/min
1
2.1.9 Pressure relief Valve, pilot operated
- Manual adjustable via rotary knob
- Operating pressure: 210 bar
- Maximum pressure: 250 bar
- Max, flow: 30 1/min
1
2.1.10 Pressure Reducing Valve
- Manual adjustable via rotary knob
- Operating pressure: 210 bar
- Maximum pressure: 250 bar
- Max, flow: 30 1/min
1
2.1.11 Pressure Compensated Flow Control Valve
- Manual adjustable via rotary knob
- Operating pressure: 210 bar
- Maximum pressure: 250 bar
- Max, flow: 30 1/min
1
2.1.12 Non-return valve, De-lockable (Pilot Check)
- Operating pressure: 210 bar
- Maximum pressure: 250 bar
- Max, flow: 30 1/min
- De-locking pressure: 2 bar
1
2.1.13 Double Acting Cylinder
- Diameter: 25mm
- Stroke: 200mm
- Piston Rod Diameter: 12.5mm
- Surface ratio approx, 4:1
- Operating pressure: 150 bar
- Maximum pressure: 200 bar
1
Item No. Description
Qty (Set)
2.1.14 Hydraulic Motor
- Bi-directional hydraulic orbit motor
- Operating pressure:140 bar
- Maximum pressure:225 bar
- Maximum rotary speed: 650 rpm
- Maximum pressure in return line: 160
- Displacement volume: 98.9 cm cube
1
2.1.15 Diaphragm accumulator with safety block
- Nitrogen filled with pressure indicator and pressure relief valve
- Manual adjustable by ratary knob
- Operating pressure: 60 bar
- Maximum pressure: 120 bar
- Accumulator Volume: 0.32 dm cube
- Gas filling pressure: 10 bar
1
2.1.16 Loading Weight
- Used for loading of the hydraulic cylinder or hydraulic motor
- Weight: 10kg
- Dimension: 100 × 90 ×150 mm
- Optional safety cover
1
2.1.17 4/3-way, center block, hand operated, center detent
- Operating pressure: 200 bar
- Maximum pressure: 315 bar
- Flow rate: 63 1/min
- T-line back pressure: 140 bar
1
2.1.18 4/3-way, center P to t, hand operated, Spring return
- Operating pressure: 200 bar
- Maximum pressure: 250 bar
- Flow rate: 63 1/min
- T-line back pressure: 140 bar
1
2.2 Training Set in basic Electro-Hydraulics
Supplementary set from Basic hydraulics
Each set consist of the following items:
1
2.2.1 4/3 way, center A&B to T, Solenoid operated, spring return with manual overide
- Voltage: 24VDC
- Power consumption: 26W
- Duty/Cycle: 160 cycle/min
- Operating pressure: 200 bar
- Maximum pressure: 315 bar
- Flow rate 63 1/min
- T-line back pressure: 140 bar
1
Item No. Description
Qty (Set)
2.2.2 4/3 way, center open, Solenoid operated, spring return with manual overide
- Voltage: 24VDC
- Power consumption: 26W
- Duty/Cycle: 160 cycle/min
- Operating pressure: 200 bar
- Maximum pressure: 315 bar
- Flow rate 63 1/min
- T-line back pressure: 140 bar 
1
Item No. Description
Qty (Set)
3.1 - Operating pressure: 60 bar
- Maximum pressure: 120 bar
- Temperature range: 40 ~ + 125 degree Celsius
- Bending radius, minimal: 100mm
30
 
   Hyraulic Trainer
 

Click here for more information (PDF file)

ECAML (PDF file)

HYDRAU_2000A (PDF file)
PNEU_3000A (PDF FILE)